Videos | junecity.studio

Real Gardens. Real Results. Practical gardening, greenhouse builds, and real-world tips to help you grow more, waste less, and live closer to nature.

24 videos

2 guided series

They Said Zip Ties Wouldn’t Work

I used zip ties to hold this pear graft firmly in place, then sealed it with grafting tape. Now new buds are pushing out, proving the graft is taking. Once the buds grow larger, I’ll remove the upper tape and let the graft union continue to fuse. #Grafting #PearTree #FruitTrees #GardeningTips

GreenhouseYouTube

DIY Greenhouse Heating: Complete System Overview — Part 7 of 8

In Part 7, I explain why this is an open system and show the pump, reservoir, pressure-release setup and radiator lines working together. This system keeps my greenhouse plants warm throughout the Connecticut winter. #ConnecticutGardening #GreenhouseHeating #RadiantHeat

Can I Grow These Peppers Again From Seed?

These orange bell peppers turned out better than I expected, so I’m saving seeds from the best ones and repeating the experiment next season. I’ll start them in the greenhouse around January, transplant them once the weather warms up, and use the same fertilizer mix: Vigoro 10-10-10 mixed 50/50 with Soil Doctor lime. Will the next generation produce the same beautiful peppers? We’ll find out!

The Grafting Tools I Actually Use

Before grafting, I gather my pruners, sharp grafting knife, tape, zip ties, caliper, labels, marker, sharpening file and cutters. Having the right tools ready makes the entire process much easier—and don’t forget the coffee! ☕🌳

GreenhouseYouTube

DIY Greenhouse Heating: Reservoir and Pressure Release — Part 6 of 8

In Part 6, I explain the multiple purposes of the open water reservoir. It keeps the system filled when water evaporates and provides a place for air bubbles and excess pressure to escape at the system’s highest point. #HydronicHeating #GreenhouseSetup #DIYEngineering

This Cut Can Make or Break Your Graft 🌱🔪

A successful graft starts with a clean, sharp wedge. I taper both sides evenly so the scion fits tightly and the cambium layers can line up properly. #Grafting #FruitTreeGrafting #TreePropagation #GardeningTips #BackyardOrchard

GreenhouseYouTube

DIY Greenhouse Heating: How the Water Circulates — Part 4 of 8

In Part 4, I show how the reservoir keeps water in the line and how the circulation pump moves it through the entire system. The heated water travels through the radiant floor and radiator lines before returning to the furnace. #HydronicSystem #RadiantFloor #GreenhouseProject

GreenhouseYouTube

DIY Greenhouse Heating: Radiator Fins Explained — Part 5 of 8

In Part 5, I show the radiator fins positioned around the greenhouse and explain how they release additional heat into the space. The water circulates through each section and then returns to repeat the cycle. #RadiatorHeating #WinterGreenhouse #DIYSystem

A Jamaican Favorite Is Blooming in Connecticut! 🇯🇲

My naseberry tree is covered in blossoms right here in Connecticut! 🇯🇲 Growing one of my favorite Jamaican fruits this far north still amazes me. Now let’s see how many flowers turn into fruit! #Naseberry #JamaicanFruit #ConnecticutGardening #GreenhouseGrowing #TropicalFruit

The Caliper Trick for a Perfect Pear Graft

A simple caliper trick helps me find a cutting that closely matches the branch size, giving the graft a better chance of lining up and healing successfully.

GreenhouseYouTube

DIY Greenhouse Heating: Measuring the Heat — Part 2 of 8

In Part 2, I explain how I measure the temperature difference between the hot water leaving the furnace and the cooler water returning. I also introduce the formula used to estimate how many BTUs the system transfers each hour. #HydronicHeating #GreenhouseDIY #RadiantHeat

The Perfect V-Graft Fit

I pushed the scion down until the V-shaped cut fit tightly, then secured everything with zip ties so the graft stays in place while it heals. #Grafting #FruitTreeGrafting #GardeningTips #BackyardOrchard

GreenhouseYouTube

DIY Greenhouse Heating: Calculating the BTUs — Part 3 of 8

In Part 3, I use the system’s 7.66-gallon-per-minute flow rate and a 10-degree temperature difference to calculate approximately 38,300 BTUs per hour. I also begin explaining the purpose of the water reservoir. #BTUCalculation #GreenhouseHeating #DIYHeating

Finding the Perfect Cutting for My Pear Graft

I used a caliper to find a Kieffer pear cutting that closely matches the branch size. A good match makes it easier to line up the cambium layers.

I Rooted Sugar Cane Before Cutting It

My first sugar cane grew with very short joints, so instead of harvesting it, I wrapped moist coco coir around the stalk and encouraged the nodes to grow roots while it was still attached. Now I can cut it off, plant it, and turn one cane into even more plants. I currently have 11 growing, and rooted sugar cane plants will be available on my website once they’re ready. #SugarCane #PlantPropagation #GrowYourOwnFood #ContainerGardening

Part 3: Wrapping the Snapped Nectarine Limb to Grow Roots

Part 3 of trying to turn this snapped nectarine limb into another tree. I added Clonex rooting hormone, packed the area with coco coir, used my electric sprayer to moisten it, then wrapped it with foil to keep it dark and humid. Now the real test begins.

GreenhouseYouTube

DIY Greenhouse Heating: Full Explanation — Part 1 of 8

In Part 1, I introduce my custom greenhouse heating system and explain how I modified a 30,000-BTU natural-gas furnace. Stainless-steel tubing circulates heated water to the radiant floor while the furnace also warms the greenhouse air. #GreenhouseHeating #DIYGreenhouse #RadiantFloorHeating

This Ratchet Pruner Makes Cutting Thick Branches Easy

This ratchet pruning shear cuts through thick branches one squeeze at a time. It is sharp, powerful, and much easier on your hands than regular pruning shears.

GreenhouseYouTube

DIY Greenhouse Heating: The Final Results — Part 8 of 8

In the final part, I show the tropical and citrus plants this system helps me grow in Connecticut, including citrus planted directly in the ground. Maintaining a stable temperature allows these sensitive plants to remain healthy through the winter. #GrowingCitrus #TropicalPlants #WinterGardening

You’ve Been Wrapping Grafts the Wrong Way!

This simple grafting-tape technique protects the scion and makes it easier to unwrap later without disturbing the graft union. #TreeGrafting #GraftingTips #FruitTrees #PlantPropagation #BackyardOrchard

I Turned My Zucchini Into a Tree 🌳

This zucchini is starting to look like a tree! Growing it vertically keeps the fruit off the ground, helps with slugs, and makes the flowers easier for bees to find. Would you try this? #Zucchini #VerticalGardening #GardenTips #GrowYourOwnFood #VegetableGarden

GreenhouseYouTube

This Chunky Coco Coir Has My Plants Exploding With Growth!

Since I started using these chunky coco coir bricks in my greenhouse, my plants have been growing like crazy! My rubber plant, Jamaican June plum, and lemon tree are all thriving. It worked so well that I bought another brick!

I Grafted an Apple Onto a Graft!

A few years ago, I grafted a seed-grown apple onto my Yellow Delicious tree. Now I’ve grafted Honeycrisp onto that seed-grown branch. Three different apple genetics growing on one tree! #AppleGrafting #FruitTrees #BackyardOrchard #Gardening #Grafting

Is My Garlic Finally Ready?

I pulled another garlic bulb, and this one was a nice size! I think they’re finally ready, so it’s time to harvest the rest.